| ICMPv6 Error Messages |
| 1 |
destination-unreachable |
Destination unreachable |
0 |
no-route |
no route to destination |
| 1 |
communication-prohibited |
communication with destination administratively prohibited |
| 2 |
beyond-scope |
beyond scope of source address |
| 3 |
address-unreachable |
address unreachable |
| 4 |
port-unreachable |
port unreachable |
| 5 |
failed-policy |
source address failed ingress/egress policy |
| 6 |
reject-route |
reject route to destination |
| 7 |
|
Error in Source Routing Header |
| 2 |
packet-too-big |
Packet too big |
0 |
|
| 3 |
time-exceeded |
Time exceeded |
0 |
ttl-zero-during-transit |
hop limit exceeded in transit |
| 1 |
ttl-zero-during-reassembly |
ragment reassembly time exceeded |
| 4 |
parameter-problem |
Parameter problem |
0 |
bad-header |
erroneous header field encountered |
| 1 |
unknown-header-type |
unrecognized Next Header type encountered |
| 2 |
unknown-option |
unrecognized IPv6 option encountered |
| 100 |
|
Private experimentation |
|
| 101 |
|
Private experimentation |
|
| 127 |
|
Reserved for expansion of ICMPv6 error messages |
|
| ICMPv6 Informational Messages |
| 128 |
echo-request |
Echo Request |
0 |
|
| 129 |
echo-reply |
Echo Reply |
0 |
|
| 130 |
|
Multicast Listener Query (MLD) |
0 |
|
There are two subtypes of Multicast Listener Query messages:
- General Query, used to learn which multicast addresses have listeners on an attached link.
- Multicast-Address-Specific Query, used to learn if a particular multicast address has any listeners on an attached link.
These two subtypes are differentiated by the contents of the Multicast Address field, as described in section 3.6 of RFC 2710 |
| 131 |
|
Multicast Listener Report (MLD) |
0 |
|
| 132 |
|
Multicast Listener Done (MLD) |
0 |
|
| 133 |
router-solicitation |
Router Solicitation (NDP) |
0 |
|
| 134 |
router-advertisement |
Router Advertisement (NDP) |
0 |
|
| 135 |
neighbour-solicitation |
Neighbor Solicitation (NDP) |
0 |
|
| 136 |
neighbour-advertisement |
Neighbor Advertisement (NDP) |
0 |
|
| 137 |
redirect |
Redirect Message (NDP) |
0 |
|
| 138 |
|
Router Renumbering |
0 |
|
Router Renumbering Command |
| 1 |
|
Router Renumbering Result |
| 255 |
|
Sequence Number Reset |
| 139 |
|
ICMP Node Information Query |
0 |
|
The Data field contains an IPv6 address which is the Subject of this Query. |
| 1 |
|
The Data field contains a name which is the Subject of this Query, or is empty, as in the case of a NOOP. |
| 2 |
|
The Data field contains an IPv4 address which is the Subject of this Query. |
| 140 |
|
ICMP Node Information Response |
0 |
|
A successful reply. The Reply Data field may or may not be empty. |
| 1 |
|
The Responder refuses to supply the answer. The Reply Data field will be empty. |
| 2 |
|
The Qtype of the Query is unknown to the Responder. The Reply Data field will be empty. |
| 141 |
|
Inverse Neighbor Discovery Solicitation Message |
0 |
|
| 142 |
|
Inverse Neighbor Discovery Advertisement Message |
0 |
|
| 143 |
|
Multicast Listener Discovery (MLDv2) reports |
|
|
| 144 |
|
Home Agent Address Discovery Request Message |
0 |
|
| 145 |
|
Home Agent Address Discovery Reply Message |
0 |
|
| 146 |
|
Mobile Prefix Solicitation |
0 |
|
| 147 |
|
Mobile Prefix Advertisement |
0 |
|
| 148 |
|
Certification Path Solicitation (SEND) |
|
|
| 149 |
|
Certification Path Advertisement (SEND) |
|
|
| 151 |
|
Multicast Router Advertisement (MRD) |
|
|
| 152 |
|
Multicast Router Solicitation (MRD) |
|
|
| 153 |
|
Multicast Router Termination (MRD) |
|
|
| 155 |
|
RPL Control Message |
|
|
| 200 |
|
Private experimentation |
|
|
| 201 |
|
Private experimentation |
|
|
| 255 |
|
Reserved for expansion of ICMPv6 informational messages |
|
|
